National Institute of Metrology, Quality and Technology – Inmetro, issued the following Inmetro Ordinances:
392 – Technical Quality Regulation and the Conformity Assessment Requirements for Gas Lighters – Consolidated.
394 - Compliance Assessment Requirements for Disposable Plastic Cups - Consolidated.
396 - Compliance Assessment Requirements for High Visibility Safety Vests - Consolidated.
These Ordinances revoke the items VI, XIII, XXVII of art. 18, I and IX of art. 19 of Inmetro Ordinance No. 258, 6 August 2020, published in the Federal Official Gazette on 7 August 2020, section 01, page 25, previously notified through G/TBT/N/BRA/907/Add.1.
All products, services and processes that are subject to a conformity assessment procedure; Product and company certification
Quality requirements
Ordinance 404, 28 August 2019. (10 page(s), in Portuguese)
Proposes improvements in the criteria and procedures for the registration of products, inputs and services under Inmetro's regulatory scope and which compliance is compulsorily assessed. The registration of products constitutes, in the form of the Law, the act by which Inmetro authorizes, subject to the existence of a Certificate of Compliance, the use of the Compliance Identification Label and the marketing of the product or input or the provision of the service.
It revokes Inmetro Ordinance 512, 11 November 2016.
(1) Brazilian Official Journal (Diário Oficial da União) 168, 30 November 2019, section 1, page 74; (2) Law 8.078/1990; Law 9.933/1999; Law 12.545/2011; Law 10.406/2002 and its amendments; Inmetro Ordinance 250/2016; Inmetro Ordinance 118/2015; Inmetro Ordinance 248/2015; Inmetro Ordinance 480/2013; Inmetro Ordinance 649/2012; (3) Brazilian Official Journal; (4) Not informed.
This addendum aims to inform that the National Institute of Metrology, Quality and Technology – Inmetro, issued that Ordinance no. 258, 6 August 2020, that approves the improvement of the procedures for granting the registration and for the collection of the registration fee by Inmetro, revoking the Ordinance No. 512, 7 November 2019, previously notified under G/TBT/N/BRA/907.
This Ordinance shall enter into force on the date of its publication in the Brazilian Official Gazette.
National Institute of Metrology, Quality and Technology – Inmetro, issued the following Inmetro Ordinance:
33 – Approves the Technical Regulation for catalytic converters intended for replacement is approved, in the form of the Conformity Assessment Requirements and the Specifications for the Conformity Identification Seal, set, respectively, in Annexes I and II - Consolidated.
The Ordinance revokes the item XII of art. 18 and item V of art. 19 of Inmetro Ordinance No. 258, 6 August 2020, published in the Federal Official Gazette on 7 August 2020, section 1, page 25.
National Institute of Metrology, Quality and Technology – Inmetro, republished the Ordinance 392, 22 December 2020 due to non-publication of the annexes in the Official Gazette on 31 December 2020, Section 1, Edition 250, page 55.
140/2021 – Approves the General Requirements for Supplier's Declaration of Conformity (RGDF Product) - Consolidated.
The Ordinance revokes the items XXX of art. 18 and XXII of art. 19 of Inmetro Ordinance 258, 6 August 2020, published in the Federal Official Gazette on 7 August 2020, section 1, page 25.
National Institute of Metrology, Quality and Technology - Inmetro, issued the following Ordinance 139, 19 March 2021 that:
Approves the consolidation of regulation for bars and wire of steel for armor for Reinforced Concrete Structures, in the form of the conformity assessment requirements and the specifications for the conformity identification seal, established, respectively, in Annexes I and II.
Inmetro Ordinance No. 139 revokes on the effective date of adoption:
I - Item III of Article 18 of Ordinance 258, 6 August 2020, published in the Federal Official Gazette on 7 August 2020, section 1, page 25.
National Institute of Metrology, Quality and Technology - Inmetro issued Ordinance 231, 18 May 2021 that:
Approves the consolidation of conformity assessment requirements for helmets for drivers and passengers of motorcycle and similar.
Inmetro Ordinance No. 231 revokes:
I - item V of Art. 18 of Ordinance 258, 6 August 2020, published in the Federal Gazette on 7 August 2020, section 1, page 25.
National Institute of Metrology, Quality and Technology – Inmetro, issued Ordinance 303, 12 July 2021, that:
Approves the consolidation of the regulation for transportable containers for liquefied petroleum gas (LPG), according conformity assessment requirements and specifications for the conformity identification seal, respectively, in Annexes I and II of this Ordinance.
Inmetro Ordinance 303 revokes:
© Organisation mondiale du commerce 2021 Contactez-nous Mentions légales ver 2.0.1.19930 (20/01/2021 11:05 )
